Home>Product > Leather tag cutting machine

Circular Knife Slitting Machine

Slitting: Uses upper and lower circular knife slitting method, capable of slitting various leathers, paper, fabrics, abrasive cloth, sandpaper, non-woven fabrics, and thick and thin plastic films. Anything that can be cut with scissors can be slid, producing smooth, neat cuts without burrs or errors. Rewinding: It adopts magnetic powder tension control and 75mm air expansion shaft upper winding, swing-type feeding, no need to lift up and down, which is very user-friendly, easy to operate and understand. The winding tightness can be adjusted at will, and the surface is as flat as a mirror.

Send Inquiry

Description

Automatic leather label machine
2 Mechanical pressure: 1-3 tons,c custom sizes available.
Temperature adjustment range:0-500C,customizable from 0-1200C.
4 Drive method:DC motor.
5 Leather conveying mode: Servo motor.
6 Power supply:220V,50Hz,380V customizable.
7 Transmission accuracy:0.2 mm.
89 Power:4kW,4000W available. Maximum pressure: 150 MPa (not recommended to operate at full capacity as it may damage the machine).
10 Cutting direction adjustment: Up,down,left,right(four directions).
11 direction adjustment: Left and right (Hot pressing).
12 Receiving gold-plated paper: Automatic.
13 Operating mode: Progressive/Automatic
14 Hot pressing time: 0.1 seconds -999 seconds
15 Cutting time: 0.1 seconds -999 seconds.
16 Working mode: Manual/Automatic.
17 Mechanical pressure:1T-3T.
18 Heating plate area: 16*14cm.
19 Main unit dimensions: 2.4m(L) x0.8m(W) x1.5m(H)
20 Weight:400kg.